Push-In Wire Connectors  2 port - Yellow (500/Bag)

Push-In Wire Connectors 2 port - Yellow (500/Bag)

Item #: EBWC-19-PI2-YW

Push-In Wire Connectors Yellow 2-Ports (500/Bag)

Read more

Select Color Option* :


Push-In Wire Connectors are used to join two or more AWG wires together. It is a fast, easy, and secure way to create an insulated connection for electrical wiring installations. Push In connectors are an alternative option to using twist-on wire caps (wire nuts) to form effective wire connections, and they provide insulation that is equivalent to the conductors. No twisting or taping of conductors is required.

Before inserting wires into the push-in connectors, the ends of the wires should be stripped of their vinyl sheath. Each single wire end should then be pushed into a single connector port, and once connected, it remains securely in place. The clear plastic housing makes wire connections easier to manage and contains the wires in the housing unit to minimize the effects of an electrical malfunction.

With a Push in wire connector you can plan your electrical wiring arrangement by choosing the right number of ports needed for each electrical situation. Choose between 2, 3, 4, 5, 6 or 8 ports to best fit your electrical wiring needs.

Note: Only (CU) copper wiring can be accommodated with these Push In connectors! Before starting any electrical installation, make sure the power is turned off.!

Push In Connectors are color identified with the number of ports in each unit:

2 ports- Yellow (500 pc/bag)

3 ports- Orange (500 pc/bag)

4 ports- Silver (400 pc/bag)

5 ports- Blue (300 pc/bag)

6 ports- Purple (250 pc/bag)

8 ports – Black (200 pc/bag)

Push in Wire Connectors benefits:

  • Wire gauge range is 12 - 22 AWG
  • Uses Solid or Stranded Wires
  • UL94V-2 flame retardant material
  • Voltage rating: 600V maximum (up to 1000 Volts in fixtures and signs)
  • Temperature range from -40F to 221F (-30C to 105C)
  • Saves space by combining wires to one unit
  • Also available in multi-bag cartons
  • Must be used in an approved electrical box, enclosure or light fixture.
  • Integrated test port enables continuity testing
  • Can only be used with (CU) copper wire

Electrical Basics is an online supplier to OEM’s, Contractors, Manufactures and the general public.

Order today for fast delivery!


Write a review

Note: HTML is not translated!
    Bad           Good